/
Student Printing - Pharos Print Center (Desktop and Mobile)

Student Printing - Pharos Print Center (Desktop and Mobile)

Pharos is currently working on adding SSO functionality for the Pharos Print mobile app. This section will be updated with the correct information when that functionality is available again.

For the time being, use the card reader located near each printer to release print jobs.

Pharos print using a laptop or desktop computer

  1. Navigate to the Pharos Print Center (print.uwosh.edu/myprintcenter) - must be on campus to log in

  2. Click Log in with SSO.

  3. Log in using your UW Oshkosh email username and password.

  4. Click the Upload button

  5. Once the pop-up for upload appears, select the documents you wish to upload.  

  6. Review the characteristics of the document you wish to print prior to it printing. The default setting is Black & White and Double Sided. 

  7. To print: Scan your TitanCard or Scan the QR code on the printer from within the Pharos App to release your document(s). 

 

Pharos print using an Android or iOS Device - UNAVAILABLE

Pharos is currently working on adding SSO functionality for the Pharos Print mobile app. This section will be updated with the correct information when that functionality is available again.

For the time being, use the card reader located near each printer to release print jobs.

  1. Open your device's app store

  2. Search for, install, and then open Pharos Print (app will only allow uploads and functionality while on campus on Titan WiFi)

  3. Enter print.uwosh.edu as the Server Address and 443 as the Port when prompted

  4. Input your NetID credentials, do not include @uwosh.edu after your username.

  5. Select Upload (location will vary depending on Android or iOS device) and search for and select the file(s) you'd like to print.

  6. Review the characteristics of the document you wish to print prior to it printing. The default setting is Black & White and Double Sided. 

  7. To print: scan your TitanCard or Scan the QR code on the printer from within the Pharos App to release your document(s). 

Locating the QR Code

Each printer available to utilize the Pharos Print App will have a QR reader affixed to the printer. It will look like this: 

QR Codes will be located in obvious places on each printer to allow for easy-access but may vary in location due to the model of printer. 

Releasing a Print Job with QR Reader

After sending a print job to the print queue open the Pharos Print app and select the QR Icon in the upper right hand corner

Once the QR icon is selected, the photo application on the phone will open, allowing an image to be captured. Point the camera at the QR Code at the desired printer to allow the print job(s) to be released.