Troubleshooting: Swart Hall

Swart Hall - Room Directory

Swart General Access Classrooms

Projection issues 

Computer

  1. Verify the projector is turned on

  2. Verify the computer is on

  3. Verify the correct source is selected on the control panel on the media tower

  4. Verify the VGA/hdmi cable is connected to the adapter and the adapter is connected to the computer

  5. Have faculty disconnect and reconnect hdmi adapter 

Document Camera

  1. Verify the projector is turned on

  2. Verify the document camera is turned on

  3. Verify the correct source is selected on the control panel on the media tower

  4. Verify the VGA/hdmi cable is connected to the port labeled VGA/hdmi out on the back of the document camera

VHS/DVD

  1. Verify the projector is turned on

  2. Verify the media tower is turned on 

  3. Verify the correct source is selected on the control panel on the media tower

Laptop

  1. Verify the projector is turned on

  2. Verify the computer is on

  3. Verify the correct source is selected on the control panel on the media tower

  4. Verify the laptop is connected to the system using the room laptop cable

  5. Verify the laptop is set to mirror or duplicate displays

Audio issues

Computer

  1. Verify Media tower turned on 

  2. Verify amp turned on

  3. Verify correct source selected on control panel on Media Tower

  4. Verify audio cable connected to computer

  5. Have faculty disconnect and reconnect hdmi adapter

  6. Verify audio not muted on computer 

  7. Verify amp turned on

  8. Turn volume control located on the Media tower control panel to the right

Laptop

  1. Verify Media tower turned on 

  2. Verify amp turned on

  3. Verify correct source selected on control panel on Media Tower

  4. Verify audio cable connected to computer

  5. Verify audio not muted on computer 

  6. Verify amp turned on

  7. Turn volume control located on the Media tower control panel to the right

DVD/VHS

  1. Verify Media tower turned on 

  2. Verify amp turned on

  3. Verify correct source selected on control panel on Media Tower 

  4. Verify amp turned on

  5. Turn volume control located on the Media tower control panel to the right